✏️ Editing: ExtUvLoop.php Read Only

<?php

namespace RectorPrefix202411\React\EventLoop;

use RectorPrefix202411\React\EventLoop\Tick\FutureTickQueue;
use RectorPrefix202411\React\EventLoop\Timer\Timer;
use SplObjectStorage;
/**
 * An `ext-uv` based event loop.
 *
 * This loop uses the [`uv` PECL extension](https://pecl.php.net/package/uv),
 * that provides an interface to `libuv` library.
 * `libuv` itself supports a number of system-specific backends (epoll, kqueue).
 *
 * This loop is known to work with PHP 7+.
 *
 * @see https://github.com/bwoebi/php-uv
 */
final class ExtUvLoop implements LoopInterface
{
    private $uv;
    private $futureTickQueue;
    private $timers;
    private $streamEvents = array();
    private $readStreams = array();
    private $writeStreams = array();
    private $running;
    private $signals;
    private $signalEvents = array();
    private $streamListener;
    public function __construct()
    {
        if (!\function_exists('uv_loop_new')) {
            throw new \BadMethodCallException('Cannot create LibUvLoop, ext-uv extension missing');
        }
        $this->uv = \uv_loop_new();
        $this->futureTickQueue = new FutureTickQueue();
        $this->timers = new SplObjectStorage();
        $this->streamListener = $this->createStreamListener();
        $this->signals = new SignalsHandler();
    }
    /**
     * Returns the underlying ext-uv event loop. (Internal ReactPHP use only.)
     *
     * @internal
     *
     * @return resource
     */
    public function getUvLoop()
    {
        return $this->uv;
    }
    /**
     * {@inheritdoc}
     */
    public function addReadStream($stream, $listener)
    {
        if (isset($this->readStreams[(int) $stream])) {
            return;
        }
        $this->readStreams[(int) $stream] = $listener;
        $this->addStream($stream);
    }
    /**
     * {@inheritdoc}
     */
    public function addWriteStream($stream, $listener)
    {
        if (isset($this->writeStreams[(int) $stream])) {
            return;
        }
        $this->writeStreams[(int) $stream] = $listener;
        $this->addStream($stream);
    }
    /**
     * {@inheritdoc}
     */
    public function removeReadStream($stream)
    {
        if (!isset($this->streamEvents[(int) $stream])) {
            return;
        }
        unset($this->readStreams[(int) $stream]);
        $this->removeStream($stream);
    }
    /**
     * {@inheritdoc}
     */
    public function removeWriteStream($stream)
    {
        if (!isset($this->streamEvents[(int) $stream])) {
            return;
        }
        unset($this->writeStreams[(int) $stream]);
        $this->removeStream($stream);
    }
    /**
     * {@inheritdoc}
     */
    public function addTimer($interval, $callback)
    {
        $timer = new Timer($interval, $callback, \false);
        $that = $this;
        $timers = $this->timers;
        $callback = function () use($timer, $timers, $that) {
            \call_user_func($timer->getCallback(), $timer);
            if ($timers->contains($timer)) {
                $that->cancelTimer($timer);
            }
        };
        $event = \uv_timer_init($this->uv);
        $this->timers->attach($timer, $event);
        \uv_timer_start($event, $this->convertFloatSecondsToMilliseconds($interval), 0, $callback);
        return $timer;
    }
    /**
     * {@inheritdoc}
     */
    public function addPeriodicTimer($interval, $callback)
    {
        $timer = new Timer($interval, $callback, \true);
        $callback = function () use($timer) {
            \call_user_func($timer->getCallback(), $timer);
        };
        $interval = $this->convertFloatSecondsToMilliseconds($interval);
        $event = \uv_timer_init($this->uv);
        $this->timers->attach($timer, $event);
        \uv_timer_start($event, $interval, (int) $interval === 0 ? 1 : $interval, $callback);
        return $timer;
    }
    /**
     * {@inheritdoc}
     */
    public function cancelTimer(TimerInterface $timer)
    {
        if (isset($this->timers[$timer])) {
            @\uv_timer_stop($this->timers[$timer]);
            $this->timers->detach($timer);
        }
    }
    /**
     * {@inheritdoc}
     */
    public function futureTick($listener)
    {
        $this->futureTickQueue->add($listener);
    }
    public function addSignal($signal, $listener)
    {
        $this->signals->add($signal, $listener);
        if (!isset($this->signalEvents[$signal])) {
            $signals = $this->signals;
            $this->signalEvents[$signal] = \uv_signal_init($this->uv);
            \uv_signal_start($this->signalEvents[$signal], function () use($signals, $signal) {
                $signals->call($signal);
            }, $signal);
        }
    }
    public function removeSignal($signal, $listener)
    {
        $this->signals->remove($signal, $listener);
        if (isset($this->signalEvents[$signal]) && $this->signals->count($signal) === 0) {
            \uv_signal_stop($this->signalEvents[$signal]);
            unset($this->signalEvents[$signal]);
        }
    }
    /**
     * {@inheritdoc}
     */
    public function run()
    {
        $this->running = \true;
        while ($this->running) {
            $this->futureTickQueue->tick();
            $hasPendingCallbacks = !$this->futureTickQueue->isEmpty();
            $wasJustStopped = !$this->running;
            $nothingLeftToDo = !$this->readStreams && !$this->writeStreams && !$this->timers->count() && $this->signals->isEmpty();
            // Use UV::RUN_ONCE when there are only I/O events active in the loop and block until one of those triggers,
            // otherwise use UV::RUN_NOWAIT.
            // @link http://docs.libuv.org/en/v1.x/loop.html#c.uv_run
            $flags = \UV::RUN_ONCE;
            if ($wasJustStopped || $hasPendingCallbacks) {
                $flags = \UV::RUN_NOWAIT;
            } elseif ($nothingLeftToDo) {
                break;
            }
            \uv_run($this->uv, $flags);
        }
    }
    /**
     * {@inheritdoc}
     */
    public function stop()
    {
        $this->running = \false;
    }
    private function addStream($stream)
    {
        if (!isset($this->streamEvents[(int) $stream])) {
            $this->streamEvents[(int) $stream] = \RectorPrefix202411\uv_poll_init_socket($this->uv, $stream);
        }
        if ($this->streamEvents[(int) $stream] !== \false) {
            $this->pollStream($stream);
        }
    }
    private function removeStream($stream)
    {
        if (!isset($this->streamEvents[(int) $stream])) {
            return;
        }
        if (!isset($this->readStreams[(int) $stream]) && !isset($this->writeStreams[(int) $stream])) {
            \uv_poll_stop($this->streamEvents[(int) $stream]);
            \uv_close($this->streamEvents[(int) $stream]);
            unset($this->streamEvents[(int) $stream]);
            return;
        }
        $this->pollStream($stream);
    }
    private function pollStream($stream)
    {
        if (!isset($this->streamEvents[(int) $stream])) {
            return;
        }
        $flags = 0;
        if (isset($this->readStreams[(int) $stream])) {
            $flags |= \UV::READABLE;
        }
        if (isset($this->writeStreams[(int) $stream])) {
            $flags |= \UV::WRITABLE;
        }
        \uv_poll_start($this->streamEvents[(int) $stream], $flags, $this->streamListener);
    }
    /**
     * Create a stream listener
     *
     * @return callable Returns a callback
     */
    private function createStreamListener()
    {
        $callback = function ($event, $status, $events, $stream) {
            // libuv automatically stops polling on error, re-enable polling to match other loop implementations
            if ($status !== 0) {
                $this->pollStream($stream);
                // libuv may report no events on error, but this should still invoke stream listeners to report closed connections
                // re-enable both readable and writable, correct listeners will be checked below anyway
                if ($events === 0) {
                    $events = \UV::READABLE | \UV::WRITABLE;
                }
            }
            if (isset($this->readStreams[(int) $stream]) && $events & \UV::READABLE) {
                \call_user_func($this->readStreams[(int) $stream], $stream);
            }
            if (isset($this->writeStreams[(int) $stream]) && $events & \UV::WRITABLE) {
                \call_user_func($this->writeStreams[(int) $stream], $stream);
            }
        };
        return $callback;
    }
    /**
     * @param float $interval
     * @return int
     */
    private function convertFloatSecondsToMilliseconds($interval)
    {
        if ($interval < 0) {
            return 0;
        }
        $maxValue = (int) (\PHP_INT_MAX / 1000);
        $intInterval = (int) $interval;
        if ($intInterval <= 0 && $interval > 1 || $intInterval >= $maxValue) {
            throw new \InvalidArgumentException("Interval overflow, value must be lower than '{$maxValue}', but '{$interval}' passed.");
        }
        return (int) \floor($interval * 1000);
    }
}

🔐 Sid Gifari File Manager Pro